Samsung Galaxy A11 Back Cover Replacement

Written By: Kristen Gismondi
  • Comments: 0
Samsung Galaxy A11 Back Cover Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

  1. qyTIqPvIRgjJar2a
    qyTIqPvIRgjJar2a
    txBHSNYHmouVxZvY
    cpOZykCQyDqEMSIL

    • Place the SIM eject tool in the hole of the sim tray.

    • Push until part of the SIM tray is pushed out.

    • Pull out the rest of the SIM tray.

  2. i5UvqSyHDqgR5KlY
    i5UvqSyHDqgR5KlY
    Xbxr1JbrLChjHRVm
    WOBlBkRNgKac3qxl

    • Gently pry open the area of the back cover near the SIM tray using an iFixit opening pick.

    • Gently move the pick along the gap and pry open the clips holding it together.

    • If possible, use multiple picks to prevent the back cover from closing.

  3. dqh6dEQIwW4dph5E
    dqh6dEQIwW4dph5E
    Pe33CirXPObROWmV
    pEGwCoC6qIPGoGnR

    • Using a hair dryer on low heat, heat the fingerprint sensor in increments of 30 seconds to loosen the surrounding adhesive.

    • Gently push the fingerprint sensor until it detaches from the back cover.

    • If needed, remove the button by prying it from the bottom of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kristen Gismondi

Member since: 12/11/14

88929 Reputation

0 comments