Ring Spotlight Cam Battery Motion Detector Replacement

Written By: Marisol Esparza
  • Comments: 0
Ring Spotlight Cam Battery Motion Detector Replacement

Difficulty

Moderate

Steps

7

Time Required

15 - 30 minutes

Introduction

A step-by-step guide to remove and replace the motion detector in a Ring Spotlight Battery-Powered Cam.

  1. aXNxJGXYqiIW6Onm

    • Rotate the camera so the mounting bracket is facing you.

    • Turn the camera so the mounting bracket is at the bottom.

  2. 163hGVRoomBKTfGq

    • Press the top button and slide your thumb upward to open the camera.

  3. rfArcS6ugFRI6jhR

    • Remove the batteries in the camera before proceeding.

    • Remove the two screws located in the middle of the cover with a Phillips #1 screwdriver.

  4. nEwAkSoEhnFv5Obd

    • Remove the middle component.

  5. 2vAyTVWH6XS5YB2M

    • Remove the sticker on the cover.

    • Remove the 10 screws located around the edge of the cover.

  6. 1w1XTxyBFULNEW6g

    • Carefully close the cover.

  7. e1VDouay1cDBjITM

    • Remove the cover and replace the LED light.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Marisol Esparza

Member since: 17/01/19

37 Reputation

0 comments