Introduction
To replace the fog light bulb you will need Torx screwdrivers.
Turn the steering wheel so that the front of the front wheel faces inwards as far as possible.
- Unscrew the big Torx screw arrowed in Fig.1
-
-
Pull bumper away from car to release lower mud guard
-
Squeeze your hand into the space to reach the fog light and turn the bulb holder to the left.
-
Replace the bulb. Sometimes the small connector from the bulb holder makes a bad contact - open the connector clean and slightly twist the pins so that they make better contact.
-
-
-
Put the lower mud flap back in place, line up the bumper and replace all the screws and the plug.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
