Removing the Logitech MBJ58 Scroll Wheel from its Mount

Written By: Conor Whatley
  • Comments: 10
Removing the Logitech MBJ58 Scroll Wheel from its Mount

Difficulty

Easy

Steps

6

Time Required

1 - 2 minutes

Introduction

You will learn how to remove scroll wheel from the wheel mount.

  1. 6WMstbCnH3PhThkP

    • Hold the mouse so that the bottom is facing up.

    • Remove the single Phillips #1 screw from the bottom half of the mouse.

    باز کردن پیچ زیر موس

    h sh -

    There may be a sticker covering the screw hole.

    Eric Jensen -

  2. hDwERLZWVWAfdpEN
    hDwERLZWVWAfdpEN
    FNtJNYIZBK3ADw41

    • Place the mouse so that the bottom is resting against a hard surface.

    • Lift the top cover of the mouse gently, and remove it.

    جدا کردن قاب رو و زیر موس

    h sh -

    The cover doesn’t lift straight up on my model - once you raise the back slightly as shown, gently pull it backward (parallel to the table top, away from the cord) to disengage two plastic clips that connect the bottom to the top.

    Eric Jensen -

  3. L4xLpPJ61EikRSJG
    L4xLpPJ61EikRSJG
    AhXtWhTjZODCTEeS
    Omgj4nRMIeUakGeu

    • Locate the scroll wheel on the mouse.

    • Grab the scroll wheel with your thumb and index finger.

    • Gently lift up, to remove the scroll wheel from the mouse.

    خارج کردن چرخ اسکرول موس

    h sh -

    Good information!

    My mouse is like new again.

    Many thanks

    Arie Dekker -

  4. SRELHGKXilgwQNYm
    SRELHGKXilgwQNYm
    lJuKSc5uMPHpCSiv

    • Locate the spring on the scroll wheel, and carefully remove the spring.

    نحوه قرارگیری فنر سمت راست چرخ اسکرول

    h sh -

  5. ZOqv2FQI4aeIJQBN
    ZOqv2FQI4aeIJQBN
    TnTUsubvcKJNIXRO

    • Place the replacement spring on the correct side of the wheel (shown in the images) with the prongs pointing down.

    نحوه قرارگیری فنر سمت راست چرخ اسکرول

    h sh -

  6. dsO5mSGro2gYqRHQ
    dsO5mSGro2gYqRHQ
    ZBcJtWRYXqWrfevm
    F3OKRr31h2fudsDp

    • Locate the black wheel mount.

    • Note: Make sure that the spring hidden in the mount does not fall out.

    • Separate the wheel from its mount.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Conor Whatley

Member since: 11/01/13

498 Reputation

2 comments

Thank you! The photographs with good resolution and correct lighting made everything clear and comprehencible.

Антон Вакаренко -

Very helpful, thank you!

K.S. -