Reassembly: Top Interconnect Cable Reconnect (Outer)

Written By: Alex Diaz-Kokaisl
  • Comments: 0
Reassembly: Top Interconnect Cable Reconnect (Outer)

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

  1. 6almliBTCq2LMjCm

    • Reconnect the top interconnect cable press connector.

  2. cqUKvraYVtpbOERd
    cqUKvraYVtpbOERd
    xVZjtfv2RaNpJb6Z

    • Place the top interconnect cable bracket on the top board and align its screw holes.

  3. T6VKbVIRTQh1AfGG
    T6VKbVIRTQh1AfGG
    DTVDZVcLbJmRI5Ju

    • Use a Torx Plus 3IP driver to install the two 2.2 mm‑long screws securing the top interconnect cable bracket.

  4. ddeefYymQJtFVpHd
    ddeefYymQJtFVpHd
    FoSKS1hoYApS4hiJ

    • Place the rubber block over its spot on the top board and press it down.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Alex Diaz-Kokaisl

Member since: 16/01/22

151892 Reputation

0 comments