Reassembly: Flip Battery Connection Prereq

Written By: Alex Diaz-Kokaisl
  • Comments: 0
Reassembly: Flip Battery Connection Prereq

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

  1. ByBxNAEWalUp2cHX

    • Reconnect the flip battery press connector.

  2. gwFg6IbixhZiKPht
    gwFg6IbixhZiKPht
    qWy1PiRU5iwFwbnB

    • Lay the flip battery bracket over the press connector and align the screw holes.

  3. V5fLlRtZaWeSQaxa
    V5fLlRtZaWeSQaxa
    iOZZjA1AuOVTQqPK

    • Use a Torx Plus 3IP driver to install the 2.0 mm‑long screw securing the battery bracket.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Alex Diaz-Kokaisl

Member since: 16/01/22

151892 Reputation

0 comments