Razer Ouroboros Lock Switch Replacement

Written By: Preston Darling
  • Comments: 0
Razer Ouroboros Lock Switch Replacement

Difficulty

Moderate

Steps

3

Time Required

5 - 10 minutes

Introduction

The lock switch toggles whether or not the side grip switches on the Razer Ouroboros mouse are clickable or not. This guide will walk through how to replace these switches.

  1. 2HxhXkIvoROdbjVJ
    2HxhXkIvoROdbjVJ
    rwLxfwmQWYItVNMU

    • Flip the mouse over and remove the stickers on the back of the device. These stickers are hiding the screws we need to remove.

    • Locate and remove the captive screws to remove the hand rest.

  2. RBgKEgTaEG3KbbDc
    RBgKEgTaEG3KbbDc
    cpuyr4HqxXqXVCW3

    • Locate and remove the six 4mm screws on the back of the device.

    • Slide the side panels off the back of the mouse.

  3. AkVQIQRrrAMmJeQP
    AkVQIQRrrAMmJeQP
    6HFhHeOOcPeAEXcE

    • Using your tweezers, grab the trigger switch that you want to replace, and lift it from its slot.

    • If you have your replacement switch, place it in the newly freed slot and reassemble your device.

    • Note: the top guards of this mouse can come off now that the panel screws have been removed. Make sure these stay in place when reassembling.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Preston Darling

Member since: 26/07/16

372 Reputation

0 comments