Razer Naga Epic Top Panel Disassembly

Written By: Caius Nocturne
  • Comments: 0
Razer Naga Epic Top Panel Disassembly

Difficulty

Easy

Steps

3

Time Required

No estimate

Introduction

Instructions for how to disassemble the top assembly of the Razer Naga Epic mouse.

This is a relatively simple part of the device that houses the middle two buttons of the device as well as being responsible for bridging connections from the numpad to the mainboard.

  1. sgGukF4ItPraeHM6
    sgGukF4ItPraeHM6
    MDw2MSqRdJ2CyGGr

    • The PCB is held to the top panel by...

    • 2 x 6mm Phillips #0 screws towards the front

    • 2 grooves on the top panel holding it in towards the rear

  2. 4LkNpfcFYBEMPOAW

    • Unscrew the 2 screws holding the PCB into the top panel.

  3. KhBsHREW4N4I2sWo
    KhBsHREW4N4I2sWo
    QOJTtLSDpTufg2Ap
    CsZNajTcaGxGJ3Ex

    • Carefully slide the PCB horizontally away from the grooves on the rear end of the top panel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Caius Nocturne

Member since: 12/07/21

2076 Reputation

0 comments