Pulsar Xlite V2 Wireless Battery Replacement

Written By: Darrin Du
  • Comments: 0
Pulsar Xlite V2 Wireless Battery Replacement

Difficulty

Easy

Steps

5

Time Required

5 - 10 minutes

Introduction

Whether you're experiencing a sudden drop in performance or your mouse has ceased to function altogether, troubleshooting and replacing the battery can often be the key to restoring your device to optimal functionality.

In this step-by-step guide, we'll walk you through accessing the battery compartment and safely replacing the battery in your Pulsar Xlite V2 Wireless mouse. After following this guide, your Pulsar Xlite V2 Wireless mouse should continue to deliver smooth and reliable performance.

  1. cm2GYN3UvgZwJnxn
    cm2GYN3UvgZwJnxn
    GQFKLZNIEnrWSD1W

    • Disassembly is the first step, which requires something thin like a mini pry bar or even your fingernails, to remove the lower mouse skate on the flat underside of the mouse.

  2. dWCTBEN14BFGXcoJ

    • After removing the mouse skate, use a Phillips screwdriver to unscrew and detach the bottom layer of the mouse.

  3. F6TWmZNNYEYaeXJY
    F6TWmZNNYEYaeXJY
    KOsL6QE5XexXnCMb
    OGT4JqsrcHEBIbBV

    • To separate the bottom and top layer, begin lifting the bottom half of the mouse.

    • Next, apply some pressure by pushing the top layer towards the hinges seen in the second picture. Then, the entire top layer can be lifted off.

  4. 62r3lbNTbKJHdA1H
    62r3lbNTbKJHdA1H
    mJQQc4qFQXMqZTl1
    mGhBMk5raLqU2sl6

    • The battery is located towards the lower end of the mouse in a rectangular housing, where the palm would usually rest above, along with wires connecting to its white 3-pin slot towards the opposite side of the battery location.

    • Remove the connector from its slot and the battery.

    • The new battery can now be attached in the opposite manner by connecting the 3-pin connector in its slot.

    • The connector pin can initally be tightly secured meaning you might require slightly more force than you expect to detach the pin. Be wary of the surrounding parts near the pin as to not damage the rest of the mouse.

    • Reassembly is simply steps 2 through 4 in reverse order.

    • However, when finishing with step 2, the bottom mouse skate can be easily applied without the user of fingernails or the mini pry bar.

Conclusion

Now that you've successfully replaced the battery, enjoy the renewed efficiency and responsiveness of your Pulsar Xlite V2 Wireless mouse. Happy computing!

Author

Darrin Du

Member since: 25/10/23

148 Reputation

0 comments