PowerA Spectra Infinity Enhanced Vibration Motors Replacement

Written By: Kevyn Jorge
  • Comments: 0
PowerA Spectra Infinity Enhanced Vibration Motors Replacement

Difficulty

Moderate

Steps

8

Time Required

20 minutes

Introduction

Use this guide to replace the vibration motors of a Power A Spectra Infinity Enhanced Xbox controller.

The vibration motors may need to be replaced if they no longer vibrate when plugged in and taking part in a game that supports vibrating feedback. Please ensure that the controller is not plugged before taking it apart.

  1. DBxFkkqT1pmpRNOU
    DBxFkkqT1pmpRNOU
    vKVrCVMKyOZQ2fdu

    • Flip the controller so the back is facing up.

  2. Aox3ap5jbSIeFuJJ

    • Remove the eight 10 mm screws from the back of the controller using a Phillips #0 screwdriver.

  3. 6uwELqf5qBsOUb6g
    6uwELqf5qBsOUb6g
    oQtoZTCrGGCB21lM

    • Unlock the trigger locks before removing the backplate.

    • This will make taking the plate off easier.

    • Use your fingers and carefully remove the backplate.

  4. TUNupIxDZl52GOve

    • Remove the two 10 mm screws connecting the motherboard to the faceplate using a Phillips #0 screwdriver.

  5. h5OQtlwL3W1ayhpX
    h5OQtlwL3W1ayhpX
    GHyW16BfaUcrmysb

    • Use your hand to separate the motherboard from the face plate.

  6. nftR4OlPLSH5wIZO
    nftR4OlPLSH5wIZO
    Ljh6iNY3ijJhBZbd

    • Remove the four 7.9 mm screws using a Phillips #0 screwdriver.

  7. d5IOPjYiJkXHSWAy
    d5IOPjYiJkXHSWAy
    ABoimldeYNY1TyGk

    • Use tweezers to unplug the small plug connecting the motors to the motherboard.

    • A firm grip may be necessary for this step.

  8. HeBf1ZjScmeKptrD
    HeBf1ZjScmeKptrD
    mt4qFrtFhyk4fLkF
    dqcvK52VEvoE55SZ

    • Remove the completely freed vibration motor from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kevyn Jorge

Member since: 22/03/24

967 Reputation

0 comments