PlayStation 2 Disc Tray Belt Replacement

Written By: Vinicius Rodrigues Bellini
  • Comments: 3
PlayStation 2 Disc Tray Belt Replacement

Difficulty

Moderate

Steps

3

Time Required

1 hour

Introduction

  1. 3xi4xVfVINBW1WTw
    3xi4xVfVINBW1WTw
    Cf2NvWFe1rRELAKJ

    • Open the console case and remove the disk driver.

    • Be careful with the flat cables and its connectors.

  2. 22ZiffHBUSKkjZm3
    22ZiffHBUSKkjZm3
    1KwfxZCAXOrGUO4u
    MFjPeLG2TkXa5liO

    • Remove the disk tray and remove the gear plastic conver protection.

    • You dont need to remove any gear form its place.

    • Remove the old belt and replace with a new one.

    • The belt must be a PS2 fat compatible belt. If you don't have a PS2 you can use a radio K7 driver belt but it need to have the same diameter of the PS2 belt.

    • Old and lax belt.

    • Brand new belt.

  3. kcrU6vrKFWR1NDW2

    • Don't loose the opportunity and clean the laser lens with a cotton swab.

Author

Vinicius Rodrigues Bellini

Member since: 12/12/22

1046 Reputation

3 comments

Anyone has the measurements of this belt? What’s the thickness and what’s the diameter or circumference?

Joel -

I head 40mm diameter and 1,2mm thickness should fit fine.

Markus Ro -

Anyone has the dimensions of this belt?

What’s the circumference/radius? What’s the thickness?

Joel -