Philips HD9252 Transformer Replacement

Written By: Zach Person
  • Comments: 2
Philips HD9252 Transformer Replacement

Difficulty

Moderate

Steps

7

Time Required

20 minutes

Introduction

Follow this guide for instructions on how to remove and replace the air fryer's transformer. Removal of the transformer may be required if the device is being taken to another country where power outlets are different from the United States.

  1. UpRylcc5jMpwyYCM

    • Insert a nylon spudger underneath the top of the device.

    • Leverage the tool and pop off each of the eight tabs holding the plastic cover in place.

  2. OA1LnDrNHKAJ6SIm

    • Remove the four 12.4 mm screws in each of the corners using a JIS #1 screwdriver.

  3. DRiiY3FCLgRAPvf5

    • Remove the top by lifting it upwards and setting it down.

    Hi, I cannot lift the top half because it's blocked by the exhaust vent. Any step that I am missing?

    Lorenzo Giraudi -

  4. qcdQU6LICssGyyLD

    • Remove the two 39.5 mm screws attached to the black piece of the transformer using a JIS #1 screwdriver.

  5. X4YC1YXvAwprEKMF

    • Remove the top piece, using a Phillips #2 screwdriver, to get the whole transformer.

  6. kHoEy4h4UW6TF4uW
    kHoEy4h4UW6TF4uW
    nwEVT3jfcboIj2yQ

    • Remove the brown and white wire attached to the transformer using a spudger.

    • Disconnect both the brown and white cables.

  7. WaTpO42kXfSDd1Rj

    • Replace the transformer.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Zach Person

Member since: 14/02/24

442 Reputation

One comment

This is not the transformer, it is the coil of the shaded-pole motor.

Werner Hinzmann -