Petlibro Air Automatic Pet Feeder Power Supply Replacement

Written By: Joseph Ambriz
  • Comments: 0
Petlibro Air Automatic Pet Feeder Power Supply Replacement

Difficulty

Moderate

Steps

5

Time Required

5 minutes

Introduction

Your Petlibro Air Automatic Pet Feeder (model PLAF008) isn't turning on even when filled with food. If your answer is yes, follow these instructions to fix this problem and get your pet back to eating its food.

  1. HEWePQCBwwWYKONM

    • Make sure your device is off, and no other power supply is connected.

    • Flip your device upside down.

  2. 4xBWpABVFrJTtphF

    • Push in the black tab securing the battery compartment panel.

    • Lift up the panel.

  3. oNJrjUllSFVCJTPK

    • Remove the discharged batteries and replace them with new 3 X D alkaline batteries.

  4. LVLvvVXErrZNITO1

    • Remove the four screws in the battery compartment.

    • Remove the batteries first

  5. ELLFVI5jCh5S3jTc

    • After unscrewing, you’ll see the machinery inside your device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Joseph Ambriz

Member since: 28/08/24

425 Reputation

0 comments