Introduction
Prereq for the removing the pentalobe screws in the iPhone 16, including some safety precautions.
-
-
Unplug any cables from your phone.
-
Hold the power and either volume buttons and slide to power off your phone.
-
-
-
If your screen or back glass is badly cracked, lay overlapping strips of packing tape over the glass to protect yourself and make disassembly easier.
-
-
-
Use a P2 pentalobe driver to remove the two 7.7 mm-long screws on either side of the charging port.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
