Introduction

Removal of the Panasonic DVD-RV31 outer case is necessary to gain access to the mainboard and other components. Removing the outer case is required to perform any other repairs in following Panasonic DVD-RV31 guides.

  1. 2Av2wAE2bKtwnOGB
    • Eject the disk tray from the DVD player before removing power supply.

  2. 4DrA3HC3qPJl3MWu
    • Evenly lift upward on the disk tray front cover (not slanted, as pictured). This will allow for easier disassembly of the player.

  3. LMfCcOQPElLTYDhT
    LMfCcOQPElLTYDhT
    NVnXKquhOOaKiSSx
    • Remove the three screws running along the back edge of case cover.

    • Remove the two screws from each side of the case cover.

  4. G5kmPKCd4E5RZSmV
    • Grab edges of the cover with your hands. Pull outward slightly, then straight up.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kevin

Member since: 26/04/11

375 Reputation

0 comments