Introduction
Replacing or making repairs to your controller's bumpers can prove to be quite difficult. We have provided clear instructions below to show you how to remove the case, separate the motherboards, and remove the bumpers, to ensure a more concise process.
-
-
Insert an opening tool in the gap between the rear and front case.
-
Pry around the perimeter until the front case releases.
-
Remove the front case.
-
-
-
Remove the four 6 mm Phillips #000 screws that secure the trigger assemblies.
-
Remove the trigger assemblies.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
