Introduction
Use this guide to replace worn out handguards on Olympic-style fencing foils. All handguard parts are standardized for fencing; in this case, the old guard is being replaced with a Leon Paul handguard.
Tools
Parts
-
-
Use pliers to hold the hexnut still while using a flathead screwdriver to loosen the socket holding the wire.
-
-
-
Take the wire out under the socket holder's hole.
-
If there is tape holding down the wire, remove it.
-
-
-
Thread the wire through the large sockey holder hole.
-
Insert the sockey holder back onto the foil.
-
Thread the wire through and under the small hole of the socket holder, right next to the sockets.
-
-
-
Wrap the exposed part of the wire around the socket.
-
Using a plier to hold the hexnut, use a flathead screwdriver to tighten the socket.
-
