Nvidia Shield Pro Android TV Bottom Cover Replacement

Written By: Christian De Vera
  • Comments: 1
Nvidia Shield Pro Android TV Bottom Cover Replacement

Difficulty

Moderate

Steps

1

Time Required

10 seconds - 25 minutes

Introduction

This guide will show you how to open up your Nvidia Shield Pro Android TV. This is a prerequisite guide needed to replacement components found inside the device.

  1. tD2yiBFw4AeFPpYC
    tD2yiBFw4AeFPpYC
    eP1aODe3nauq1C2g

    • Flip to the back side of your Nvidia Shield Pro Android TV.

    • To open the bottom cover of the Nvidia Shield, start from the corner and slide your plastic opening tool across the gap.

    • If using a plastic opening tool to open the bottom cover is difficult, try using a metal spudger.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Christian De Vera

Member since: 23/01/20

141 Reputation

One comment

Hi, Shield Pro 2.

Remove 2 small cross head screws securing top cover to the back plate. Next you have to pry open the back edge and then slide the top cover forwards about 8mm away from the back plate to clear 3 catch points along each side.

S. Carter -