Nuwave Brio 6Q Air Fryer Disassembly

Written By: Jeff Miller
  • Comments: 1
Nuwave Brio 6Q Air Fryer Disassembly

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

This Air Fryer came in for service during our Repair Café. I found a bad safety switch and replaced it with a new one from eBay.

  1. There are 2 screws inside the cooking chamber.

    • There are 2 screws inside the cooking chamber.

  2. OgGQbY1GHNIxdm6S
    OgGQbY1GHNIxdm6S
    lPWLU5TSkvCm6XZS
    CFoI12xhDEAdvDnd

    • The top will pop off at these clips, use a tool or your fingers to gently pull.

  3. KUKguoTmvdWEVPWs
    KUKguoTmvdWEVPWs
    WbYSBu1qaLiphXS6

    • Remove the screws to remove the circuit board.

  4. The safety switch is what was bad on this one. I replaced it with one from eBay.

    • The safety switch is what was bad on this one. I replaced it with one from eBay.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jeff Miller

Member since: 12/04/23

206 Reputation

One comment

In the last video u showed how the top was and the switch u was going to change, how did u get the top lid off, took the 4 screws out but still didn’t pop off

Dale Lindsey -