NuVision Duo 11 MicroSD Port Replacement

Written By: Zachary Picard
  • Comments: 1
NuVision Duo 11 MicroSD Port Replacement

Difficulty

Easy

Steps

2

Time Required

5 minutes

Introduction

Follow these steps to remove the MicroSD from your NuVision DUO 11 as well as replacement.

  1. ZGIl511kMCiOC4XX

    • Place the flat end of a nylon spudger in the gap between the cover and the rest of the device.

    • Slide the spudger down each side until you hear numerous clicks.

    • Remove the back panel from the tablet.

  2. YiDZ3JPwJlinkkG5
    YiDZ3JPwJlinkkG5
    ZvLBbs2VODFAbVqK
    NDJIcSWjEN6vKJAS

    • Remove the 4.8 mm screws from the MicroSD port using a JIS #000 screwdriver.

    • Unclip the male ribbon from the female ribbon port carefully.

    • Remove the MicroSD port from the tablet.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Zachary Picard

Member since: 16/03/23

157 Reputation

One comment

Does anyone know where the CMOS battery is located?

James Zagranis -