Nintendo Switch Right Joy-Con Rail Replacement

Written By: Blake Klein
  • Comments: 0
Nintendo Switch Right Joy-Con Rail Replacement

Difficulty

Moderate

Steps

3

Time Required

30 minutes - 1 hour

Introduction

Follow this guide to replace the right Joy-Con rail in a Nintendo Switch gaming console.

Warning: the Joy-Con rail screws are torqued down and can easily strip. Make sure that you’re using a JIS #0 screwdriver to remove them.

  1. x4XcgwDgrm3FAQsZ
    x4XcgwDgrm3FAQsZ
    yFAh2SaSrW3RusKB

    • Use a spudger to flip up the small gray locking flap on the right Joy-Con rail ribbon cable ZIF connector.

  2. uTomNbPIQtUogbcQ

    • Remove the four 3.8mm Phillips #000 screws from the right Joy-Con rail.

  3. r1BPOytLNJFBCSla

    • Remove the right Joy-Con rail.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Blake Klein

Member since: 30/01/17

71611 Reputation

0 comments