Nintendo Switch Power and Volume Button Board Replacement

Written By: Blake Klein
  • Comments: 0
Nintendo Switch Power and Volume Button Board Replacement

Difficulty

Moderate

Steps

3

Time Required

30 minutes - 2 hours

Introduction

Follow this guide to replace the power and volume button board inside of a Nintendo Switch gaming console.

  1. MjDYnDbDl1VebIO3
    MjDYnDbDl1VebIO3
    qJHV2B1HCaBvcVko

    • Use a spudger to flip up the small black locking flap on the power/volume ribbon cable ZIF connector.

  2. YcCilRnkuBYSRiNx

    • Use the flat end of a spudger to pry up the tapped down power/volume ribbon cable.

  3. byMrZSCVI4C2FkU4
    byMrZSCVI4C2FkU4
    JcA3Cy6BCjUvycMZ

    • Remove the power/volume board with a pair of blunt nose tweezers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Blake Klein

Member since: 30/01/17

71611 Reputation

0 comments