Nintendo DSi Battery Replacement

Written By: Walter Galan
  • Comments: 1
Nintendo DSi Battery Replacement

Difficulty

Easy

Steps

2

Time Required

2 minutes

Introduction

Replacing your DSi's battery only requires a Phillips #00 screwdriver and a thin prying tool.

  1. xvUu2VHXnLOaoxyD
    xvUu2VHXnLOaoxyD
    GJgBKkUY2j6UrTTr

    • Unscrew the two Phillips screws securing the battery cover to the lower case.

    • The screws remain captive to the battery cover.

    • Grasp the battery cover and lift it out of the lower case.

    • If it's difficult to grasp, lightly tap the opposite side of the device.

  2. TMGAeGDWRXJKjqkf
    TMGAeGDWRXJKjqkf
    pXTJP3k1hRhVckSv

    • Using a spudger tool (or your fingernail), lift up the battery from the top.

    • There's a small tab on the top of the battery to make removal easier.

    • The liquid damage indicator sits underneath the battery. Pry gently, or you may damage the indicator.

    • Grasp the battery and remove it from the DSi.

    This is also where the water damage indicator is located, if that's important

    Vaulto -

Conclusion

To reassemble your device, follow these instructions in reverse order. Take care to align the positive (+) and negative (-) connections on the battery with the console.

Author

Walter Galan

699383 Reputation

0 comments