Introduction
Removing the back panel is simple, provided you have the correct screwdriver. Nintendo uses a special Tri-point bit for the case, be sure you have one of these before disassembling!
Tools
-
-
Remove the cartridge from the console.
-
Use a Phillips #00 Screwdriver to remove the screw securing the battery door to the rear case.
-
Remove the battery door.
-
-
-
Use a plastic opening tool or spudger to pry out the battery from the bottom. If a plastic opening tool or spudger isn't available, your fingernails may work.
-
-
-
With your hands, pry the back panel off the main case.
-
Separate the back from the front, and set it aside.
-
To reassemble your device, follow these instructions in reverse order.
2 comments
Where do I get a nintendo DS gamepak?
Kayla Maison , a gamepak is simply a GBA game.
Bob -