Nintendo 2DS Battery Replacement

Written By: Fina Beauchamp
  • Comments: 5
Nintendo 2DS Battery Replacement

Difficulty

Easy

Steps

3

Time Required

3 minutes

Introduction

This guide illustrates how to remove the upper rear panel from the Nintendo 2DS to access the battery and other parts of the device.

  1. wg4RTxdhgZNOVaab

    • Remove the two Phillips captive screws securing the upper rear panel.

    • The captive screws will not completely detach from the back panel.

  2. cdb3AdyJTrNhIjrr
    cdb3AdyJTrNhIjrr
    okYxlIGDUBKBdGNP

    • Hinge the upper rear panel upwards and outwards to remove it.

  3. YA2mNvc2fLpeZ4NZ
    YA2mNvc2fLpeZ4NZ
    yjKMPFAO1SC1LncE
    HRaiAoWcVXEMByll

    • Remove the battery from its housing by lifting it up from the side closest to the outside edge.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Fina Beauchamp

Member since: 12/01/15

3135 Reputation

5 comments

The only thing I was trying to figure out is if the bezel came up with the panel, and it’s not clear from these photos. For the record, it does not.

francis deible -

This didnt help my problem

Artemy Matveev -

maybe its because you did not plug the battery correctly matthew

Ludovic Chartrain -

or maybe its just not working ludovic 🫡

Natalia Rabago -

Who knows, will the same battery, instead of 1300mah in original, 2000mah in 'fake' works with 2DS?

Anton Kornilov -