NETGEAR WGT624 v3 Lower Case Replacement

Written By: Nicole Slagle
  • Comments: 0
NETGEAR WGT624 v3 Lower Case Replacement

Difficulty

Easy

Steps

4

Time Required

5 minutes

Introduction

Removing the lower case allows you to replace the hardware inside the device.

  1. V6qAE3xo3ETcsUPt

    • Turn the device so that the bottom is facing up.

  2. HfLKlfn1POushN5C
    HfLKlfn1POushN5C
    T1rdEJuU51M4xIcp
    xRxFBxwNoyTOTkyE

    • Use the plastic opening tool to carefully lift the rubber stops in each corner.

    • Do not completely remove the rubber stops, because they are difficult to replace.

  3. X5cBjW2YyNFv1tGI
    X5cBjW2YyNFv1tGI
    5u4cfJdemplNBtJx

    • Unscrew the 4 11.8 mm T-8 Torx screws from each corner of the device.

  4. WQMOmqQGAwLrFm4X
    WQMOmqQGAwLrFm4X
    VIHvuhBSJh4wwXSl

    • Lift the lower case straight up from the rest of the router.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Nicole Slagle

Member since: 25/01/13

83 Reputation

0 comments