Motorola Razr V3c Face-Screen Replacement

Clear a table or desk to use as a workspace. You will need a container to place small screws as they will be used in reassembly.

Open the phone's face.

Unscrew the four screws located around the face plate using a 1.5mm Hex tool.

After removing the screws, use a flat surfaced tool to take the face-screen off.

Use this step as a checkpoint. Once the face-screen cover is off, the workspace should resemble this step’s picture.

Carefully remove the face-screen using your fingers.

You may now carefully install a functioning face-screen.

After securing the face-screen into the casing, place the face screen cover back on.

Screw in the four corner screws. After completion of this step, your phone should function properly. Enjoy!