Microsoft Surface Laptop 7 (13.8-inch) Feet Replacement

Written By: Spencer Day
  • Comments: 0
Microsoft Surface Laptop 7 (13.8-inch) Feet Replacement

Difficulty

Easy

Steps

2

Time Required

5 minutes

Introduction

Follow this guide to replace worn-out or damaged feet on your Microsoft Surface Laptop 7 (13.8‑inch).

  1. 1OLhjNJLTLJMcARr
    1OLhjNJLTLJMcARr
    hlS6l4Hts6TMZLW6
    jRZjDS4oJSaQwrwL

    • Close your laptop and lay it down so the rubber feet are facing up.

  2. s3FLbRNojPmjUY2b
    s3FLbRNojPmjUY2b
    NWxYixQhNN4mWDcV
    YJsxktBQKPUGk1Dt

    • Gently slide one arm of your angled tweezers into the recess near the upper right edge of one of the feet.

    • You can also use the point of a spudger. However, you're more likely to damage the foot, if you're reusing it.

    • Use your tweezers to pry up and remove the foot.

    • The feet may eject very quickly—be careful not to lose them.

    • Repeat the process to remove the remaining feet.

    • To install a foot, align the pegs on the bottom with their cutouts in the frame and press the foot into place.

Conclusion

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Author

Spencer Day

Member since: 14/09/22

88286 Reputation

0 comments