Meta Quest 2 Head Strap Replacement

Written By: Arthur Shi
  • Comments: 1
Meta Quest 2 Head Strap Replacement

Difficulty

Very easy

Steps

7

Time Required

1 - 5 minutes

Introduction

Follow this guide to remove and replace the head strap for your Meta Quest 2.

  1. B31djmGYZZHCBoti
    B31djmGYZZHCBoti
    OEu2hrgBLV4wSLKR

    • Grasp and pull on the nose section of the facial interface to unclip it from the headset.

    Photos of each step and interim made this guide so easy to follow.

    For.The.Tech.Of.It -

  2. Be2J2NaNLeqZuRhi
    Be2J2NaNLeqZuRhi
    BFoGtcvupgIvCQIK

    • Grasp and pull on the top section of the facial interface to unclip it from the headset.

  3. uLFjxFFQlhXdWAtB

    • Remove the facial interface.

    • During reassembly, align the facial interface to the headset and use your fingers to press along the perimeter to clip it back in.

  4. URh1oymFaf6RLYSM
    URh1oymFaf6RLYSM
    yHfWoon1NiqXGyYB
    CDnYbnLkUxyibGsY

    • Use your fingers to grasp the right strap near the headset.

    • Peel the right strap away from the headset arm to unclip it.

  5. 4nENMVhqOjgOunbA
    4nENMVhqOjgOunbA
    Moo6ThGGPZGnMGZV

    • Repeat the procedure to peel the left strap away from the arm to unclip it.

  6. hSyfJboRQGTssgOk
    hSyfJboRQGTssgOk
    t5EGhNgdrvxuoPHu

    • Separate the hook and loop strip on the top strap.

  7. wquuIQnnECAaTkt2
    wquuIQnnECAaTkt2
    JVJruOK5jI2NowDF

    • Unthread the top strap from its bracket.

    • Remove the head strap.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Author

Arthur Shi

Member since: 03/01/18

272267 Reputation

0 comments