Meta Quest 2 Facial Interface Replacement

Written By: Arthur Shi
  • Comments: 1
Meta Quest 2 Facial Interface Replacement

Difficulty

Very easy

Steps

3

Time Required

1 - 3 minutes

Introduction

This guide shows how to remove and replace the facial interface (aka face padding, face cushion, or face cover) for the Meta Quest 2.

  1. B31djmGYZZHCBoti
    B31djmGYZZHCBoti
    OEu2hrgBLV4wSLKR

    • Grasp and pull on the nose section of the facial interface to unclip it from the headset.

    Photos of each step and interim made this guide so easy to follow.

    For.The.Tech.Of.It -

  2. Be2J2NaNLeqZuRhi
    Be2J2NaNLeqZuRhi
    BFoGtcvupgIvCQIK

    • Grasp and pull on the top section of the facial interface to unclip it from the headset.

  3. uLFjxFFQlhXdWAtB

    • Remove the facial interface.

    • During reassembly, align the facial interface to the headset and use your fingers to press along the perimeter to clip it back in.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Author

Arthur Shi

Member since: 03/01/18

272294 Reputation

0 comments