Introduction
Tools
Parts
-
-
pull off the black bezel around the deges
-
it is held on by double-sided tape. be careful not to break the bezel it is a somewhat thin plastic sheet.
-
-
-
carefully pry up the bottom of the screen. there is double-sided tape holding it to the back.
-
pry on one side at a time slowly and once you can fit a pair of tweezers befind the screen grab the tape. when yo pull the tape it will come off like 3m command hooks
-
be careful not to rip the tape
-
the tape is in two vertical strips about an inch from the edge
-
-
-
the replacement screen is a lp156wfg(sp)(B2) on the maingear vector mg vctr001 1660ti from 2020
-
To reassemble your device, follow these instructions in reverse order. this is not a complete guide there is only enough info for you to know how to open it little steps are missing.
