Introduction
Are there cracks in your casing? This guide will help you replace the casing.
Tools
-
-
Use pliers to grip the gear inside of the top of the device.
-
Insert a flathead screwdriver into the slit at the bottom of the device while still holding the pliers in place gripped on the gear.
-
Lay the device on its side. Holding the screwdriver stationary to hold the bottom side in place, use the pliers to unscrew the gear by turning the pliers CLOCKWISE.
-
-
-
Remove the four 14.0 mm Phillips head screws in the feet of the base of the Magic Bullet using the Phillips #1 screwdriver.
-
-
-
Remove the two 13.0 mm Phillips head screws from the white plastic cable guide using a Phillips #1 screwdriver.
-
-
-
Remove the three 11.0 mm Phillips head screws surrounding the white fan blade on the base using the Phillips #1 screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
Can you replace the base gear in a Mini Bullet? I am having a hard time unscrewing it.
Margaret Bellanger -