Mad Catz Dual Force 2 Pro Rear Cover Replacement

Written By: Alexander Coyne
  • Comments: 0
Mad Catz Dual Force 2 Pro Rear Cover Replacement

Difficulty

Easy

Steps

2

Time Required

5 minutes

Introduction

This guide will teach you how to remove and replace the rear cover of a Mad Catz Dual Force 2 Pro controller. If you need to repair the controller or access the internals of your controller you will need to remove the rear cover.

  1. 4xLVbqREJFDLLUQZ

    • Using the Phillips #1 screwdriver, remove the six 7 mm screws from the rear cover.

  2. gMILJJA3HhYEyBoQ
    gMILJJA3HhYEyBoQ
    obc6EpDFgHj3Ra1l

    • After removing the screws, you will be able to lift the rear cover of the controller.

    • There are no loose items in the controller that can fall out, so you can open it without extreme caution.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Alexander Coyne

Member since: 11/01/15

745 Reputation

0 comments