MSI MS-1782 Back Cover Replacement

Written By: Joshua Pizzo
  • Comments: 0
MSI MS-1782 Back Cover Replacement

Difficulty

Easy

Steps

2

Time Required

1 minute

Introduction

This guide is for removing the back cover of the MSI MS-1782.

  1. TbdswiABxLjFBLoT

    • Remove five 6.6 mm screws from the edges of the bottom cover using a JIS #1 screwdriver.

    • Remove one 5.6 mm screw from the center of the bottom cover using a JIS #1 screwdriver.

  2. WT2XWnGjhghv2DOE
    WT2XWnGjhghv2DOE
    bjGFX52eOELaxfNj
    1tx14ClUYTix2lRQ

    • Use an iFixit opening pick to unclip the bottom cover.

    • It is ok to run the picks along the edges since there is nothing connected to the bottom cover. It is easier to start from the sides and then work your way forward.

    • After unclipping the bottom case, pull from the back of the laptop upwards using the lip of the bottom case as a handle.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Joshua Pizzo

Member since: 08/03/23

438 Reputation

0 comments