Logitech Webcam Pro 9000 Camera Replacement

Written By: nieko
  • Comments: 0
Logitech Webcam Pro 9000 Camera Replacement

Difficulty

Difficult

Steps

4

Time Required

20 - 30 minutes

Introduction

This guide will lead you in desoldering the connections between the camera and the motherboard.

  1. AeyHbr6H4nTMxf6O
    AeyHbr6H4nTMxf6O
    DhnZHIrmxAVHryCX

    • Remove the two 8 mm Phillips #0 screws on the back cover.

    • The motherboard connects the two covers together. DO NOT separate the two yet.

    • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

  2. bRSDmuJFSaSPpcbC
    bRSDmuJFSaSPpcbC
    CyuYqB4l6O2RlZXR

    • Remove the four 6mm Phillips #0 screws connecting the motherboard and front cover.

    • DO NOT detach the wire connecting the motherboard to the front cover.

  3. ndLvfpGtUqDgDv1E

    • Remove the two 8mm Phillips#0 screws on the back of the motherboard.

  4. giKw5DLZHnldGuN2
    giKw5DLZHnldGuN2
    ALIpwOmdTFx6n2DI
    YryToYIEaAWWKN1L

    • Remove the camera from the motherboard by desoldering the two connections as shown.

    • Follow this link to learn how to properly solder and desolder your parts.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

nieko

Member since: 18/04/13

63 Reputation

0 comments