Logitech K480 Keycap Replacement

Written By: Madison

Comments: 0

Difficulty

Moderate

Steps

Time Required

5 - 10 minutes

Introduction

If your Logitech K480 keyboard is missing a keycap or if it's damaged, you can follow this guide to replace it. Replacing keycaps on rubber dome keyboards can be confusing but these steps are easy for anyone to follow. Keycaps cover the buttons that actually register what you're typing. They provide a more comfortable way to type and can also allow for customization.

Tools

Step 1

Flip the keyboard over.

Step 2

Remove the four rubber feet with a spudger.

Step 3

Slide open battery panel.
Remove the batteries.

Step 4

Remove the three 4 mm screws under the rubber feet using a Phillips #0 screwdriver.

Step 5

Remove the two 4 mm screws from beneath the battery cover using a Phillips #0 screwdriver.

Step 6

Starting by the dial, slide the spudger between the front and back panels until it lifts and snaps.
Slide a blue pick in to keep the pieces apart while you work on other areas.
Continue prying along the edges until you have enough opened that you can pull both pieces apart gently with your hands.
The loud snaps are the clips that hold the pieces together. They're not breaking and you do not need to be alarmed.

Step 7

Remove the eight 3 mm screws using a Phillips #00 screwdriver
Remove the five 2 mm silver screws from the metal plate using a Phillips #00 screwdriver.
Remove the single 4 mm black screw by the motherboard using a Phillips #00 screwdriver.