Logitech Gamepad F310 Buttons Replacement

Written By: Aaron Ajo Joseph
  • Comments: 1
Logitech Gamepad F310 Buttons Replacement

Difficulty

Easy

Steps

4

Time Required

10 minutes

Introduction

Have the buttons on your controller been through enough wear and tear? If so, here is the guide to help you with that. All you need is a Phillips #1 driver head, and a pry-tool. This guide will help you replace the buttons on your Logitech Gamepad F310.

The buttons is the input for controller to transmission's to pc for gaming purpose. The buttons are necessary for controller to play the gaming because it will not work if the buttons aren't working property. So that is reason to replacement for the buttons.

No special tools or skills are required.

  1. 5X4mDBDlm4aCpX1U
    5X4mDBDlm4aCpX1U
    ykdOIWy5uogN3YJL

    • Use a Phillips #1 screwdriver to remove all seven 3 mm screws that secure the rear case.

  2. ENHWNNOBAUMSMUUG
    ENHWNNOBAUMSMUUG
    VZVjqsEXtmDEFLfE

    • Press along the seams of the controller and gently pull the front and rear case apart.

    • If necessary, use an opening tool to help pry the front and rear case apart.

    • Make sure to open the controller with the front facing down so that the buttons do not fall out.

  3. pPS1JtQ3XEj1P4sw

    • Separate the front and rear case.

    • There are two side panels on the controller that come apart as well. When putting them back together, they slot into place on the sides of the controller.

  4. DsjUoevM3UYhCaBY
    DsjUoevM3UYhCaBY
    mAOW4IYZ63c3NGa2

    • Remove any buttons that need replacement.

    • The buttons sit loosely in the front of the controller, so flipping the front over will drop all of the buttons out.

Conclusion

You're all finished! To reassemble your device, follow these instructions in reverse order.

Author

Aaron Ajo Joseph

Member since: 05/02/24

73 Reputation

One comment

Any idea where I can get the d-pad rubber dome replacement part?

Anggoro Arif Junianto -