Logitech G920 Driving Force Steering Wheel D-Pad Replacement

Written By: Aiden Muse
  • Comments: 0
Logitech G920 Driving Force Steering Wheel D-Pad Replacement

Difficulty

Moderate

Steps

6

Time Required

15 - 25 minutes

Introduction

This guide will be used to aid you in replacing the Logitech G920 Driving Force D-Pad. The D-pad controls the inputs used to navigate menus. If your device is having problems related to the D-pad not responding, take a look at the troubleshooting guide before continuing with this guide. If you are going to continue with this guide, unplug all parts of the device from any outlets before you start.

  1. xuySMUKWmsKaOcrr

    • Use the Phillips #0 screwdriver to remove the five 9.5 mm external screws.

    • Only three of the five screws are visible from each side of the wheel due to the center unit.

  2. dgPXRSKOgcOL3SKy

    • Using the Phillips #0 screwdriver, remove the 5 mm screws holding the bumpers in place.

  3. HHIhhqLACVJfxq4q
    HHIhhqLACVJfxq4q
    GuxyKD1vCCCJHnfN

    • Using the TR25 Torx Security Screwdriver, remove the six 23.8 mm screws holding the face plate together.

    • Remove the face plate from the steering wheel.

  4. REVdYiB4jh5IxEp3
    REVdYiB4jh5IxEp3
    xBC2j1tAMBlUGOrU

    • Remove the wheel from the main steering wheel console.

    • Ensure this is done carefully as to not damage the connection wire.

  5. oW1rZCDNlUSCJgQR
    oW1rZCDNlUSCJgQR
    r4QyKoPSveOkv3Qe

    • Remove the eight 7.5 mm screws holding the steering wheel motherboard in place using a Phillips #0 screwdriver.

    • Remove the steering wheel motherboard.

  6. K6BQ1lJCOwsamcAy
    K6BQ1lJCOwsamcAy
    JDaDD3DKyECT1FVk

    • Carefully remove the original D-Pad from the console.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Aiden Muse

Member since: 12/09/23

504 Reputation

0 comments