Logitech G915 TKL Volume Wheel Replacement

Written By: Jahnyla Blakely-Wright
  • Comments: 2
Logitech G915 TKL Volume Wheel Replacement

Difficulty

Moderate

Steps

4

Time Required

20 minutes

Introduction

Use this guide to remove and replace the volume wheel on the Logitech G915 TKL keyboard. The volume wheel may need to be replaced if it's come loose due it breaking and is no longer working properly.

A Phillips #00 Screwdriver is necessary to complete this guide.

  1. pdoAhbjOBCV3T1o1
    pdoAhbjOBCV3T1o1
    Rxpw6PlSk31i6rvq

    • Turn the keyboard around and peel back the Logitech sticker near the top center of the keyboard, as well as the plastic layer underneath.

    • Unscrew the two 2.5 mm #0 Phillips screws circled in the picture provided.

    • Remove the backplate by grabbing the notch to the right and pulling up.

  2. DoAhph6CyA4GBXPH
    DoAhph6CyA4GBXPH
    oByPIEVaQKGnZXqN

    • Remove the foam strips shown in the picture provided.

    • Unscrew all the 2 mm #00 Phillips screws on the back of the keyboard circled in the picture provided.

  3. ZcRWuUgEaFGNB1JQ

    • Remove the keyboard's casing to reveal the motherboard.

  4. gFIOG6wpNPnAEk3O
    gFIOG6wpNPnAEk3O
    UbOKuwYgWQ2ZTaOC

    • Carefully remove the volume wheel from the device using your fingers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jahnyla Blakely-Wright

Member since: 13/03/23

241 Reputation

2 comments

Where tf do you get the scroll bar thing from?

Bit Stream -

Did you have any luck?

josesalomonfm -