Introduction

Use this guide to replace or clean the drain filter in your LG WM3050CW Washing Machine.

The drain filter collects large debris, like loose change, that might be stuck to your clothes. If your washing machine isn't removing this debris, or if your tub is not draining properly, then your filter may be broken or clogged.

  1. FHTdBPOfjhwt5lKX
    FHTdBPOfjhwt5lKX
    MRxptRjLpIHFuE5Y
    • Unclip the filter door from its slot in the chassis and let it rest on the ground.

  2. tqOKwJXcZHAimBqZ
    tqOKwJXcZHAimBqZ
    StJGbqoDGfBNIfGs
    x6K2tKOOypoLjex1
    • Place a bowl next to the device.

    • Pull the drain filterhose out of its slot in the chassis enough to lay over the bowl.

    • Remove the plug at the end of the drain filter hose to release excess water into the bowl.

    • During reassembly, re-plug the drain filter hose and thread it back through its slot in the chassis.

  3. Z3IhT4CTZeOCho2w
    Z3IhT4CTZeOCho2w
    DQUYJZQaJ6QjcLwy
    FZTVBPNp5NKYExLi
    • Twist the drain filter counterclockwise until its fully disconnected from the chassis.

    • Remove the drain filter.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Ask our Answers community for help.

Alex Diaz-Kokaisl

Member since: 16/01/22

151892 Reputation

0 comments