LG Front Load Washing Machine Detergent Bellows Replacement

Written By: Bill Gilbert
  • Comments: 0
LG Front Load Washing Machine Detergent Bellows Replacement

Difficulty

Moderate

Steps

13

Time Required

45 minutes - 1 hour

Introduction

Use this guide to replace the detergent bellows or detergent hose in your LG front load washing machine.

The detergent bellows connects the detergent dispenser assembly to the tub.

This guide will work for most LG front load washing machines. This guide is written with a model WM3050CW washer. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.

  1. IWjgsUtZOIuShVqa
    IWjgsUtZOIuShVqa
    cmisDLhhQ1ZspJJT

    • Before you begin your repair, perform the following:

    • Turn off the main water supply

    • Unplug your washer

    • Disconnect all water connections at the rear of your washer

  2. a1CEVEuZVuhsJs3v
    a1CEVEuZVuhsJs3v
    s1Dx6pURHR66tbUG
    WMesicEUoODuO1DI

    • Remove the screw(s) securing the top panel brackets to the back panel.

    • You don't need to remove the screws securing the brackets to the top panel.

  3. MXS5aiRAHxRbjTgD
    MXS5aiRAHxRbjTgD
    BqIF6FiMQVaOIZZQ

    • Slide the top panel towards the rear of the device to disconnect its clips.

  4. vk2XTwmpQAn5SSnW
    vk2XTwmpQAn5SSnW
    mKqTwIkkot2M6aDA

    • Tilt the top panel upward to completely disconnect it from the chassis.

    • Remove the top panel.

  5. Sh1lUfSYKsCUbib6
    Sh1lUfSYKsCUbib6
    FHuG6LDAjUcGYWvr
    io46keEPByRWavUB

    • Disconnect the connectors attached to the control panel.

    • Always grip cables by their connectors and not the wires themselves.

  6. P2pQDgkIGMBLIEsQ
    P2pQDgkIGMBLIEsQ
    qAENSdyEVOowrsq5
    tDL4DN2WHtaODDdu

    • Unclip any connections the control panel cable has to the chassis or other components.

  7. D3i2u4IZQbXcD5As

    • To prevent confusion, label each detergent hose and its corresponding dispenser connection.

    • You can use masking tape or mark the components themselves.

  8. gdWTROQ2DwwlCX2O
    gdWTROQ2DwwlCX2O
    eJR22ILdEysTGysd

    • Use slip joint pliers to pinch the detergent dispenser hose clamp and pull it away from the assembly.

  9. fdo2dLaiBW1RnCCN
    fdo2dLaiBW1RnCCN
    KxL2GxhDJCqaD5Im

    • Use slip joint pliers to gently rotate the detergent dispenser hose back and forth around its connection and loosen it.

  10. NFketUDohaaBh5oH
    NFketUDohaaBh5oH
    crdEIEp16NRMBcSn

    • Pull the detergent dispenser hose straight off its connection on the assembly.

    • Repeat the loosening and removal procedure for each hose.

  11. nxbLNYd1WGw2eCky
    nxbLNYd1WGw2eCky
    romueM3OaV2hTNfQ
    kG1VCKeENvPPPXsg

    • Loosen any fasteners securing the bellows to the detergent dispenser.

    • Pull the bellows straight off its connection on the dispenser to disconnect it.

  12. doo2jlcUnR5KukCS
    doo2jlcUnR5KukCS
    LH4FO3MCyWFu36vu
    YBYVOSVf2kW4twCL

    • Loosen the fastener securing the bellows to the drum.

    • Pull the bellows straight up from the drum to disconnect it.

  13. P3F1CvwbHORFlnXv

    • You're now left with the bellows.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Ask our Answers community for help.

Author

Bill Gilbert

Member since: 30/06/22

35117 Reputation

0 comments