Kyocera Hydro Life Power Button Replacement

Written By: Haley Brown
  • Comments: 0
Kyocera Hydro Life Power Button Replacement

Difficulty

Easy

Steps

6

Time Required

10 minutes

Introduction

This guide will show you how to replace the power button for a Kyocera Hydro Life phone.

  1. B1AeGssZ1yMV6VLZ

    • Remove the back cover.

    • Pry the cover upward from the gap above the charger port as displayed.

  2. iopKQ5Qxa2VLJDAJ

    • Remove the battery.

  3. bnSOCKN2HMAuAgfu
    bnSOCKN2HMAuAgfu
    jeJXTFRVcx21P2Ye

    • Use a PH00 screwdriver to remove the 6 screws from the mid-frame.

    • Removing the screws too carelessly can result in them being damaged or stripped.

  4. UxJhGuaGRKJqEQCc

    • Remove the back panel trim.

    • The back panel trim is fairly thin, be cautious when removing it.

  5. ooXwY2k2QgYZU4x1

    • Remove the back panel.

    • Pry off the 4 corners first.

  6. YguYOkMIYtqvQrSv
    YguYOkMIYtqvQrSv
    V2sMJjighMWAQGZw

    • Remove the power button with the tweezers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Haley Brown

Member since: 21/09/18

183 Reputation

0 comments