Kocaso M750B Display Replacement

Written By: Syeda Anosha Ali

Comments: 0

Difficulty

Difficult

Steps

Time Required

15 minutes

Introduction

Our Display Replacement is crafted with precision and compatibility in mind, ensuring a seamless fit into your Kocaso M750B. With easy-to-follow installation instructions, you can embark on this DIY journey to rejuvenate your tablet without the need for professional assistance. These instructions also include soldering and desoldering connections. For safety guidelines on how to solder, visit this page for more information.

Tools

Step 1

Pry the edges of the tablet apart using an iFixit opening tool.

Step 2

Remove three 1.2 mm screws from the motherboard using a Phillips #000 screwdriver.

Step 3

Disconnect the ribbon cables.
This guide will help you identify what type of ribbon cables the tablet uses and helps you on how exactly to remove different types of ribbon cables. The exact ribbon cables you are looking for are called ZIF connectors.

Step 4

Desolder the connections to the motherboard and the display.
When using the soldering iron, make sure to review the safety guidelines provided in the introduction. Work carefully and precisely to avoid any electrical discharge, puncture of the battery, or heating of the motherboard.