Kocaso M750B Battery Replacement

Written By: Syeda Anosha Ali
  • Comments: 0
Kocaso M750B Battery Replacement

Difficulty

Difficult

Steps

3

Time Required

10 - 20 minutes

Introduction

Battery replacement is the process of removing the battery, you have to unsolder the wires connected to the motherboard. Replace the old battery with a new battery for better performance. Battery replacement is very important for the device as It plays an big part on how it performs, make sure to use safety tools while removing the battery. For safety guidelines on how to solder, go to this page.

  1. IMyqjRdUQj65KAfk
    IMyqjRdUQj65KAfk
    EOCsnsCgJssxUXDF
    5QHXxDcFLgEcF5Cy

    • Pry the edges of the tablet apart using an iFixit opening tool.

  2. SxYLZth4Nftx1hx1

    • Desolder the solder joints that connect the motherboard to the battery.

    • The solder joints are connected to one red and one black cable.

    • When using the soldering iron, make sure to review the safety guidelines provided in the introduction. Work carefully and precisely to avoid any electrical discharge, puncture of the battery, or heating of the motherboard.

  3. sWPjXLljVPjrFRpG
    sWPjXLljVPjrFRpG
    wPSq2Jb1LZ1PPQMT

    • Pry the battery up using the flat end of a spudger.

    • Remove the adhesive under the battery and carefully lift it up to replace it.

Conclusion

To reassemble your device, follow these instructions in reverse order, also to be very careful while removing the battery and use the safety tools.

Author

Syeda Anosha Ali

Member since: 12/09/23

399 Reputation

0 comments