Introduction
Use this guide to replace a faulty water pump on your Kenmore 110 Series Washing Machine.
Tools
-
-
Carefully remove both wire harnesses connected to the pump.
-
Squeeze and pull back hose clamp.
-
Twist drain hose off of pump.
-
Using a 1/4" socket wrench, remove the three mounting screws.
-
Pull the pump out of place.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
9 comments
i have a speed problem with my washer ...
please provide info on how to test the water pump once it's removed...
The instructions say nothing of the pulley belt and wheel.
I'm looking to work on a 110. 81080100
and
I have read that transmission fluid leaks out when the washer is on its side.
Is there a way to temporarily plug it?
thomas -