Jura Impressa S model front cover

Written By: VauWeh
  • Comments: 2
Jura Impressa S model front cover

Difficulty

Easy

Steps

7

Time Required

No estimate

Introduction

The front cover must be removed to get access to the internal components such as the brew group and the steam valve.

  1. iKjTSjWdZWelhwhC
    iKjTSjWdZWelhwhC
    Tr1qFeUOSeEtR3Hx

    • Always remove the power cord from the wall outlet.

    • Lift out the coffee tray

    • Remove the lid sealing the coffee bean container

    • Remove all of the coffee beans you can possibly remove.

    • Pull the adjuster of the coffee bean grinder straight up

    • Remove the four T15 Torx screws

    With the Impressa XS 90 there is an additional ground beans funnel that needs to be removed that hides two of the four torx screws

    Ian Channing -

  2. GHC4BQEOd3xBxpbO
    GHC4BQEOd3xBxpbO
    ENDey3nHNSdqPAXo

    • Remove the cup heat plate.

    • It can be opened like a book.

    • Below the cup heat plate there are three more T15 Torx screws. Remove them.

  3. CHNhp1KFdPZOx2Mb

    • The top cover is now free. Lift ´er up and set ´er aside.

    With the Impressa XS 90 there is an additional cover above the grinder that has wires glued to it that prevents you from taking the top completely off.

    Ian Channing -

  4. NcoCAPPrunA2JpDr
    NcoCAPPrunA2JpDr
    rTyXT4QOSeX2dqRG

    • Remove the knob for the steam valve by simply pulling it off.

    • The front cover is secured with a Torx T15 screw. Remove it.

  5. iNrlupeJVhSCliDg

    • Now the front cover can be opened like a door for a few inches. The hinge is on the left.

  6. LqnPGUUY2vYbHguM

    • Various hoses hinder the further opening of the front cover. You need to remove the steam valve keypad from the cover.

    • Use a spudger to lift the two notches at the top of the front cover a bit to release the keypad at the top.

    • Lift the keypad upwards and pull it to the back. The steam pipe will slide out from its connection.

    • All hoses can remain connected.

  7. rrtBc3gtHQCaeh2N

    • Remove the silicone hose leading from the steam valve to the coffee spout. If it is secured with a cable tie which must be removed first.

    • The front cover is now free and can be opened.

Conclusion

To reassemble your device, follow these instructions in reverse order

Author

VauWeh

Member since: 19/10/15

234423 Reputation

0 comments