JBL Xtreme 2 Speaker Replacement

Written By: charlymoron

Comments: 3

Difficulty

Moderate

Steps

Time Required

15 - 20 minutes

Introduction

If you’re JBL Xtreme 2's speaker sounds disoriented or is making no sound, use this guide to replace the speaker(s). The speakers inside are used to make the bass for the experience of listening to music. When a speaker is damaged you will hear distorted music or none at all.

Before beginning make sure to power off the speaker and disconnect from any external power source.

Tools

Step 1

Use a spudger or other prying tool to gently pry open the middle section of the speaker.

There are screws on the sides underneath the back part of the panel. These need to be removed first to avoid breaking the plastic clips.

Alastair Rankin -

Step 2

To open the case, open the front side gently rotating along the hinge.

Step 3

Once you have the speakers exposed like in the image, at the bottom part you will snap open the back end piece of the grill still attached.

Step 4

Using a Phillips #00 screwdriver, remove the four 12.9 mm screws securing the faulty speaker.
Once you remove the screws, the speaker will be loose and you will be able to move it around easily.

Step 5

Lift the speaker out of its housing and you will see two cables connecting the speaker. Pull the speaker towards you and each of the cable connectors away from you.
Do the same for both cables.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

charlymoron

Member since: 30/10/22

169 Reputation

2 comments

Jep u open it wrong way. I broken My speaker Plastic attachment so i need extra work whit wrong opening way. I can sent u a some pic whit this.

Bender -

Happened to me too. Please include the images about the screw from the other repair manual (for the battery)

Alastair Rankin -