JBL Flip 3 Front Active Driver Replacement

Written By: College Student
  • Comments: 8
JBL Flip 3 Front Active Driver Replacement

Difficulty

Moderate

Steps

4

Time Required

20 - 25 minutes

Introduction

  1. IDuHXxykE6UGbqKw

    • Remove plastic outer housing using hands or a standard spudger.

  2. VAvGX4ftbmBpormx

    • Using your hands, carefully remove outer housing and frame to expose the internal workings of the speaker.

  3. EnnmVs6iEQfRkMZf

    • Remove the 8.9mm Phillips #00 screws on each corner of the driver to be replaced. There are four screws per driver. Be sure to set the screws somewhere safe to ensure they aren’t lost.

  4. kt1HSHA2o4aWFaab

    • Remove the 3-pin connector from motherboard.

    Amy idea where to find the replacement speakers?

    John Poyhonen -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

College Student

Member since: 22/02/17

3479 Reputation

7 comments

where did you source the drivers from?

Rashid Saad Siddiqui -

hi my flip 3 1 speaker is have give the problem thats not give the clear voice , so i want to change the parts can u help me i am where to buy this parts

manu -

I too want to know where you can buy new drivers. Can't find them online so far...

Johannes -

i need help getting the front speakers only where would i get them???

brian ortiz -

Sir

my flip 3 Both speaker is have give the problem thats not give the clear voice , so i want to change the parts can u help me i am where to buy this parts

Anil Kumar Hembrom -

Same Thing I have only find the driver on a French Website : https://ecommerce.mysav.eu/fr/accueil/13...

test.accountfr -

My JBL flip 3 had those ‘3 pin connectors’ non-removable. So basically I destroyed my speaker.

siim.suurkyla -