Infinix hot 10i Charging port Replacement

Written By: Orusakwe Fortune
  • Comments: 7
Infinix hot 10i Charging port Replacement

Difficulty

Moderate

Steps

7

Time Required

No estimate

Introduction

    • Using the Philip screw driver, unscrew the pins/screw on the phone back.

    • Using the opening tool,pry through the phone cover

    • Remove the battery protector and carefully remove battery

    • Separate the printed circuit board from other parts

    • Using the rework station and tweezers, separate the charging port from the panel

    • Replace a new charging with rework station and tweezers

    • Reassemble the phone back together

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Orusakwe Fortune

Member since: 29/04/22

496 Reputation

7 comments

الموبايل لا يقبل شحن لماذا

BTS ARMY -

نوعه infinix hot6

BTS ARMY -

اولن تأكد مدخل الشاحن

Abdirahman ali -

Please I want to repair my Infinix Smart 5

The charging port is not conducting electricity again and if it does the charging is extremely slow please help me

Olaitan -

او قم بتخير مدخل الشاحن عله امفنكس اكظر شي بخراب مدخل

Abdirahman ali -

التليفون مغير له شاشه ولما يسخن او اقلل اضاءة الشاشه تبدأ تشوشر او تطلع خطوط مشوشه

Osama Hawila -

My Infinix Hot10 also like this and it's been restarted suddenly many times a day these days. Should I buy a new one or it still can be repaired?

Arma P. -