Introduction
pre-req for lower section (charging board, loudspeaker)
-
-
Undo the three Phillips #00 screws.
-
Disconnect the loudspeaker flex connector.
-
Carefully remove the metal bracket.
-
-
-
Disconnect the motherboard flex cable and the antenna cable.
-
Unplug the headphone jack connector.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
when I removed the metal bracket, the headphone jack connector was stuck to the underside of it and came with it, breaking the small ribbon cable. I had to replace the headphone unit…
facebook2 -